Product introduction of Dominic air filter k330ao:
Dominic air filter k330ao It is mainly used to remove the pollutants in the compressed air system, such as atmospheric dust, rust, pipe peeling and other corrosive solid particles, water vapor, condensed water droplets and aerosols, liquid oil, oil mist and microorganism, etc., so as to provide high-quality compressed air for the compressor air system. K330AO ? Dominic filter element After absorbing oil and absorbing water, the compressed air is difficult to pass through when it is wet or full of water, which increases the working pressure drop of the filter and increases the energy consumption. The filter medium of the filter does not absorb liquid to ensure that more dust can be contained in the gap. The water mist in the filter is carried into the filter cup for secondary discharge. Kuo filter element can remove the odor of the liquid or solid particles such as 330g.
Recommendations for other models:
K430ao Dominic precision filter element 、 Dominic precision filter k017acs 、 K220ao Dominic precision filter element
Performance characteristics of Dominic air filter k330ao:
1. Air permeability precision filter element:
The filter element adopts the fiber filter material with strong hydrophobicity and oil drainage, and adopts the framework with good permeability and high strength to reduce the resistance caused by passing.
2. High efficiency of precision filter element:
The filter element adopts German fine perforated sponge, which can effectively prevent oil and water from being carried away by high-speed air flow, so that the small oil drops coming down the road will gather at the bottom of filter sponge and be arranged to the bottom of filter container.
3. Air tightness of precision filter element:
A reliable sealing ring is used at the joint of the filter element and the filter shell to ensure that the air flow is not short circuited and prevent impurities from entering the downstream directly without passing through the filter element.
4. Corrosion resistance of precision filter element:
The filter element adopts corrosion-resistant reinforced nylon end cover and anti-corrosion filter core framework, which can be used in harsh working conditions.
Technical parameters of Dominic air filter k330ao:
Filter element model: K330AO ——Dominic precision filter element
Filtration precision: 0.01um
Residual oil content: 0.01ppm
——Frame: stainless steel
——Marking of end cover
Matters needing attention for the replacement of DINK precision filter element:
a. Isolate the filter, close the inlet valve or compressed air supply system, and then close the outlet valve after complete pressure relief (or complete pressure relief through the filter drain hole after closing the relevant valve).
b. Screw off the housing and remove the used filter element.
c. Clean the filter housing.
d. Replace with a new filter element (do not miss the sealing ring, the filter element should be tightly installed) 。